This topic has been archived. It cannot be replied.
-
枫下家园 / 我爱我车 / 求助,换冬胎之前为了好看,特地买了一套Infiniti的气门芯帽,镀铬的那种,圆柱形的特光滑。前两天突然发现悲剧了,拧不下来了。也不知道是原来拧的太紧还是车行时候力的关系,现在怎么拧都拧不下来。用工具也不行,都刮花了也拧不动。各位有什么好建议么?谢谢
-honeylager(No Name);
2017-11-30
(#11212882@0)
-
万能的wd40 LOL
-facenorthface(小北);
2017-11-30
(#11212889@0)
-
你要拿手固定住下面那一段,找个工具。
-hunhunhunhun(不知道);
2017-11-30
(#11212890@0)
-
你用工具的时候,下面气密芯怎么固定的?忘了气密芯啥样了。如果是金属的,那就两把钳子,一个夹住气密芯,一个夹住冒。如果这都不行,还有最后一招:用铁锯在冒上锯出一个槽来,固定住气密芯,然后用螺丝刀把冒拧下来。
-newrover(漫游);
2017-11-30
(#11212936@0)
-
关键是帽子是圆的,工具夹不紧
-honeylager(No Name);
2017-11-30
(#11213083@0)
+1
-
所以要在圆帽子上面锯出一个槽,就可以用螺丝刀拧了。这是破坏性的,最后一招。别用普通钳子了,先用板子看看能不能夹紧。。。或者用那种专门用来夹紧的钳子。
-newrover(漫游);
2017-11-30
(#11213128@0)
-
wd40,上面下面各一个钳子,拧
-kking(捣蛋);
2017-11-30
(#11213117@0)
-
谢谢各位,回去试试看
-honeylager(No Name);
2017-11-30
(#11213465@0)