This topic has been archived. It cannot be replied.
-
枫下家园 / 住房话题 /
tor
插座和水龙头本论坛人才济济,不才有两个难题求教。
1,厨房里有个插座去年夏天开始突然没电,现已排除任何有关电阻丝,插座后面连线及插座本身问题。电表显示电压正常,不知是何原因,很是挠头。
2,浴盆的热水管道口与水龙头接触部位有个小沙眼,长“咬”龙头的密封胶垫,尽管我用砂纸把沙眼磨过,好了一些,但仍然需每月更换一次胶垫。很是麻烦。
哪位高手能指点一二,不胜感谢!
-ltb(mike);
2003-3-18
{350}
(#1092842@0)
-
1. must be some problem 有关电阻丝,插座后面连线及插座本身问题. Maybe there is no Current . 2. Same as mine. Keep changing 胶垫 or change 水龙头
-farmer(农夫®);
2003-3-18
(#1092845@0)
-
第一个原因是导线接触不好, 第二个是附近有没有开关来控制这个插座。再检查一下
-111111(快乐老家);
2003-3-18
(#1092851@0)
-
There is no such problem.anyway thanks a lot.
-ltb(mike);
2003-3-18
(#1092855@0)
-
我遇到过第一个问题,简直不可思议。最后,当我把所有的都拆开并重新安装时,发现插座后一段零线几乎被剪断,显然是建筑公司的电工留下的隐患。接后好就没问题了。
-rollor(Rollor);
2003-3-18
(#1092862@0)
-
是否老房子都存在这个问题?我租的房子就有这个零线接触不良的问题。
-111111(快乐老家);
2003-3-18
(#1092923@0)
-
我房子电线的问题不是因为老化,而是因为建筑工人活太糙。他在剥绝缘胶皮的时候,没有使用专业的脱皮钳子,而是用剪刀或普通钳子,结果把电线几乎剪断,造成接触不良。
-rollor(Rollor);
2003-3-18
(#1092959@0)
-
电表显示电压正常,就算有电了吧?怎么算没电呢?
-silverwater(没正事,我改还不行);
2003-3-18
(#1092897@0)
-
接触不好就是这个问题,接触电阻大,所以只有空载电压,一旦带上负荷,负荷的电压不够工作电压,当然你的电器就无法使用。
-111111(快乐老家);
2003-3-18
(#1092921@0)
-
这样的话那个插头会火花四射的,用不了多一会就糊了。
-silverwater(没正事,我改还不行);
2003-3-18
(#1093004@0)